Skip to main content

Introduction to Smart Grid MCQ-2



1 Installed capacity of solar power in India till 2016
  •   9.01 GW
  •   10.3 GW 
  •   8.45 GW
  •   6.54 GW


2. Example of the second generation solar cell
  •  Silicon Wafer-based solar cell
  •  Advanced thin-film solar cell
  •  Thin-film solar cell
  •  None of the above


3. The conversion efficiency of a polycrystalline silicon solar cell is
  •  12.5-15 %
  •   11-14 %
  •   10-13 %
  •   9-12 %


4. A PV array has the open-circuit voltage 370V, short circuit current 28 A and maximum power is 8kW then find the fill factor
  •  0.66
  •  0.55
  •  0.77
  •  0.88


5. What is the significance of series resistance in solar cell modeling
  •  Represent load resistance
  •   Represent the wire resistance
  •   Represent the top and rare contact resistance
  •   All of the above


6. With increase in solar irradiance level, the cell open circuit voltage (Voc) and short circuit current (Isc) will be
  •  Voc increases and Isc decreases
  •  Voc decreases and Isc increases
  •  Both decrease
  •  Both increase


7. Which state produces maximum wind energy in India
  • Maharashtra
  • Tamil Nadu
  • Gujarat
  • Rajasthan


8. Type of generator used in wind turbine
  • DC generator
  • Synchronous generator
  • Double fed induction generator
  • none of the above


9. The total power of a wind stream is proportional to
  • velocity of stream
  • (velocity of stream )^2
  • (velocity of stream )^3  
  • 1/(velocity of stream)


10. Maximum efficiency of wind turbine is
  • 69.3
  • 59.3
  • 70.3
  • 65.3


ThankYou